Overview

Released in Australia in September 2016, the Aston Martin DB11 was a rear-wheel drive grand tourer. Hand-built in Gaydon, England, the Aston Martin DB11 was powered by a 5.2-litre twin-turbocharged V12 petrol engine that was mated to an eight-speed ZF automatic transmission.

Twin-turbo AE31 V12 engine

The 5204 cc AE31 V12 engine had an aluminium block and cylinder head, fully CNC machined combustion chambers, twin turbochargers with water-cooled intercoolers, double overhead camshafts, four valves per cylinder, variable intake and exhaust camshaft timing, and a compression ratio of 9.3:1. To reduce fuel consumption, the Aston Martin DB11’s twin-turbo V12 engine had:

• ‘Intelligent Bank Activation’ which could shut down one bank of cylinders during periods of low demand (such as when cruising, lift-off or under light acceleration); and,
• A stop-start function that enabled the engine to shut down while the DB11 was stationary in traffic.

According to Aston Martin, the DB11 could accelerate from rest to 100 km/h (62 mph) in 3.9 seconds and had a top speed of 322 km/h (200 mph).

Body and styling

The Aston Martin DB11 was underpinned by a new extruded bonded aluminium structure which included Hot Form Quenched (HFQ) aluminium; cast-magnesium door structures were also used to minimise mass. Compared to the Aston Martin AM113 DB9 , the DB11’s body structure was lighter, stronger and more space efficient (particularly for rear occupants).

Relative to the AM113 DB9, the Aston Martin DB11 was 30 mm longer (at 4750 mm), 45 mm wider (1950 mm, excluding door mirrors), 8 mm higher (1290 mm) and had a 65 mm longer wheelbase (2805 mm); the longer wheelbase enabled the V12 engine to be fitted further back in the vehicle’s body for better weight distribution (51:49). Furthermore, the DB11 had a dry weight of 1770 kg.

Design cues for the Aston Martin DB11 included its front-hinged clamshell bonnet, LED headlights, roof strakes which flowed from the A-pillar to C-pillar, and sloping decklid which blended into the sculpted tail-lights.

Aerodynamics and torque vectoring

To reduce front-end lift, the Aston Martin DB11 had a gill-like Curlicue which released high-pressure air from inside the wheel arch via a concealed vent within the side-strake. Rear-end lift was reduced by the ‘Aston Martin AeroBlade’, a virtual spoiler which received air via the air intakes in the base of each C-pillar.

The Aston Martin DB11 had a torque vectoring function that could brake an inside wheel when cornering to generate a yaw effect to reduce understeer.

Suspension

The Aston Martin DB11 had double wishbone suspension front suspension and independent multi-link rear suspension (both with coil springs, anti-roll bars and adaptive dampers). The DB11 had selectable drive modes – GT, Sport and Sport Plus – which varied:

• Damper settings for the electronically-controlled Bilstein dampers (Aston Martin’s ‘Adaptive Damping System’ or ADS);
• Accelerator pedal response;
• Transmission behaviour;
• Steering weight; and,
• Torque Vectoring by braking behaviour.

Steering

The Aston Martin DB11 had rack-and-pinion steering with electric power assistance; the steering ratio was 13.0:1, while the steering wheel required 2.4 turns from lock to lock.

Safety equipment

Standard safety equipment for the Aston Martin DB11 include dual front airbags, front knee airbags, front seat-mounted side airbags (for pelvis/thorax protection), curtain airbags (for head protection), ABS, electronic brake force distribution, brake assist, electronic stability control, traction control and front seatbelts with pre-tensioners and load limiters.

Wheels and brakes

The Aston Martin DB11 had 9.0J x 20-inch front and 11.0J x 20-inch rear cast flow formed alloy wheels, with 255/45 ZR20 front and 295/35 ZR20 rear Bridgestone S007 tyres that were specially developed for the Aston DB11 and had a unique tread pattern.

The Aston Martin DB11 had 400 mm by 36 mm cast iron front brake discs which ‘floated’ on an aluminium bell and were fitted with six-piston monobloc callipers. The 360 mm by 32 mm cast iron rear discs also had an integrated aluminium bell and four-piston monobloc callipers.

Features: Aston Martin DB11

Inside, the Aston Martin DB11 featured a full-colour 12-inch TFT LCD instrument cluster which was developed in conjunction with Daimler AG (parent company of Mercedes-Benz). The DB11 also had a centrally-mounted eight-inch TFT screen for infotainment functions. The satellite navigation system could be controlled via a rotary dial, while an optional touchpad provided character recognition, multi-touch and gesture support.

Standard features for the Aston Martin DB11 included a 400 watt Aston Martin Audio System with digital radio tuner (DAB), USB connectivity and Bluetooth mobile phone connectivity and audio streaming, a Wi-Fi Hub, dual-zone climate control air conditioning, Strathmore leather upholstery, power adjustable and heated front seats with memory settings, cruise control with speed limiter, LED headlamps with integrated daytime running lights, a black leather steering wheel, remote central locking with proximity key (i.e. keyless entry), power windows, power adjustable and heated door mirrors with folding function, a power adjustable steering column (for height and reach), push-button start, Alcantara headlining, tyre pressure monitoring, a trip computer, an alarm and immobiliser.

The Aston Martin DB11 also had an ‘auto-park assist’ function and a surround camera system for 360-degree coverage that could provide a ‘bird’s eye’ view of the vehicle to assist in low-speed manoeuvring.

Brochure

• Brochure: Aston Martin DB11 (February 2016)

Recalls: Aston Martin DB11

Overview

Manufacturers, or importers, issue recalls for defects or faults which have the potential to cause injury. Generally, manufacturers will inform the original buyers if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. Please note that the recalls below (if any) are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: Aston Martin DB11

2016-17 Aston Martin DB11: tyre pressure monitoring system incorrectly calibrated

In July 2017, a recall was issued for Aston Martin DB11 vehicles that were manufactured from October 2016 to June 2017. In these vehicles, the Tyre Pressure Monitoring System (TPMS) was calibrated incorrectly and may therefore not illuminate the low tyre pressure warning at the minimum activation pressure. For the VINs of the recalled Aston Martin DB11 vehicles, please see PRA 2017/16190.

2016-18 Aston Martin DB11 V8 and V12 Coupe: inadvertent airbag deployment

In January 2018, a recall was issued for Aston Martin DB11 V8 and V12 Coupes that were available for sale from 31 August 2016 to 9 January 2018. If there was an electrostatic discharge (ESD) combined with a damaged steering column module clock spring and insufficient grounding of the upper steering column, the driver’s airbag may deploy. The driver would be alerted to a potential fault by illumination of the airbag warning light in the instrument cluster and an additional warning message. If the airbag deployed while the vehicle was being driven, it could injure the driver and increase the risk of a collision. For the VINs of the recalled Aston Martin DB11 vehicles, please see PRA 2018/16551.

Problems and faults: Aston Martin DB11

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.

Problems and faults: Aston Martin DB11

No troubleshooting information is currently available for the Aston Martin DB11.

Released in Australia in September 2016, the Aston Martin DB11 was a rear-wheel drive grand tourer. Hand-built in Gaydon, England, the Aston Martin DB11 was powered by a 5.2-litre twin-turbocharged V12 petrol engine that was mated to an eight-speed ZF automatic transmission… Read fulAston Martin DB11 review

astonmartin_db11_2016_ser1_01

astonmartin_db11_2016_ser1_02

astonmartin_db11_2016_ser1_03

astonmartin_db11_2016_ser1_04

astonmartin_db11_2016_ser1_05

astonmartin_db11_2016_ser1_06

astonmartin_db11_2016_ser1_07

astonmartin_db11_2016_ser1_08

astonmartin_db11_2016_ser1_09

astonmartin_db11_2016_ser1_10

astonmartin_db11_2016_ser1_11

astonmartin_db11_2016_ser1_12

Carfection: 2017 Aston Martin DB11 review

Please note that these videos are applicable to vehicles as they are supplied to their respective markets. As such, the features, prices and performance of the vehicles in these videos may differ from those which are supplied in Australia.

Top Gear: Chris Harris drives the 2017 Aston Martin DB11

Motor Trend: 2017 Aston Martin DB11 review

Carfection: 2016 Aston Martin DB11 review